Finding the S/N on a Cherokee (KL)'s Radio
To get the correct radio code, you first need the radio serial number.
Depending on your Cherokee (KL), you can see it on the screen or find it on the radio unit itself.
It's usually written down as S/N, SN, Serial, Serial Num., Serial Number...
These are the easiest ways to find it:
1. Viewing Cherokee (KL)'s S/N on the Display
Jeep Cherokee (KL) radio does not display the serial number on the screen.
Unfortunately, the unit must then be physically removed to find the serial on a manufacturer label on the radio casing.
2. How to Find the Serial Number on the Radio Sticker
The serial number is usually located on a sticker attached to the head unit.
Step 1: Turn off the vehicle.
Step 2: After that, remove the dashboard trim.
Step 3: Then unscrew the radio brackets.
Step 4: Carefully pull the radio forward partially (Be careful not to damage the cables).
Step 5: Look for the serial number on the rear of the unit.
Step 6: Write down the full Serial Number carefully and come back to our website so that we can generate your code.
Important: Differentiate the Serial Number from the Part Number!
Example: Jeep Cherokee (KL) serial number label location
Common Serial Number Prefixes on Jeep Cherokee (KL) Radios
Your Jeep Cherokee (KL) radio serial number may start with:
T00AMT00BEU1234L5678
Common Jeep Cherokee (KL) Radio Code Situations
Many drivers encounter radio lock problems on their Cherokee (KL) after power loss.
Below are the most typical situations when this can happen.
Battery Change (Most Common)
After a battery replacement, your radio may lock.
This happens because the radio recognizes a voltage interruption, which activates the security lock.
Other Situations That Trigger a Radio Code on Jeep Cherokee (KL)
- Installing a replacement head unit will require the original anti-theft code.
- After an ECU or software reset, the radio may enter security mode.
- A fuse removal can cause the Jeep Cherokee (KL) radio to request a security code.
- Jump-starting the vehicle can trigger anti-theft mode, requiring the PIN.
Places to Check Before Paying for a Radio Code
Want free Jeep Cherokee (KL) Radio Code? Actually, you may find it.
In few cases, the code may already be available in the vehicle or in the documentation.
Check these places to save time and money before using an online generator.
Below are the most reliable places to look.
Check the Car and Its Documentation
- In the owner's manual, often on a sticker page.
- Inside the center console, sometimes on a small card.
- In the trunk, on a radio label.
- In your car paperwork from the previous owner.
- On the head unit itself, if it was removed before.
Can the Dealer Get It for You?
Dealerships can generate your radio code by checking the vehicle records in their system.
They typically ask for registration and ID before sharing the security PIN.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may need extra verification.
- You may need to visit the dealer during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently bill for the code (sometimes more than 100$).
Why Choose Our Jeep Cherokee (KL) Radio Code Generator Service?
Our Jeep Cherokee (KL) radio code lookup is designed to save time.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done online in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
The Dealer's VIN Lookup vs FindRadioCode
- Delivery time: May take hours, while FindRadioCode is instant 95% of the time.
- Availability: Dealers work Mon - Fri, while our service is 24/7.
- In-person visit: Lookup can require an appointment, while FindRadioCode works remotely.
- Pricing: It often costs over $100, while our service starts from 9.99 USD.
- Refund policy: Dealers usually offer no guarantee, while we include a full money-back guarantee.
How to Enter the Radio Code on Jeep Cherokee (KL)
Once you have the Jeep's radio code, you can enter it using the radio buttons.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the preset buttons to input the code.
After entering the full code, the radio will restore normal operation.
Be careful, because too many wrong attempts can temporarily lock the radio.
It will allow you a few missed shots before showing a WAIT message.
You can reset the lockout by leaving the radio on for 60 minutes or a set waiting period.
Frequently Asked Questions about Jeep Cherokee (KL) Radio Code
Many of their radios use a anti-theft code, but not every model year or radio type requires one.
It depends on the factory stereo and production year.
Free radio codes are rarely available.
Some online tools may help, but most codes require serial number lookup.
The only free way would be to check your car and its documentation to see if you already possess the code.
Yes, each head unit has its own unique code. If you install a replacement radio, you'll need the code for that specific unit.