How to Get Jeep Radio Code?
If your radio code is missing, you have a few options.
Dealer Option (Time-Consuming, VIN Required, With Paperwork)
The slower way to get it is by contacting a dealer, car manufacturer, or authorized service center.
They typically require your Vehicle Identification Number (VIN), proof of ownership and vehicle documents, and sometimes even a registration certificate.
The process is frequently inconvenient.
Some charge a fee (which can be expensive), while others offer it for free - but it can take hours or days.
Response times and fees depend on the brand and location.
This method is official but not ideal if you need the code quickly.
Find Radio Code - Quick, Reliable and Low-Cost
The fastest and easiest way to unlock Jeep radio is through our service.
All you need is your radio's serial number, which you can find on the unit, retrieved from the screen or located on the sticker.
There's no need to provide a VIN, and you'll get the code immediately after payment.
Coverage includes a wide range of Jeep units.
Find Radio Code handles everything automatically, and we offer a no-risk process with refund support.
The 100% easiest and cheapest way to unlock your radio.
Dealer vs Find Radio Code
|
Dealer |
Find Radio Code |
| Delivery time | Same day or several days | Instant 95% of times |
| Availability | Business hours only | 24/7 |
| In person visit? | Sometimes | Never |
| Pricing | $120-$200 | From $19.99 |
| Refund | No guarantee | Always |
How to Find the Serial Number (S/N) on Your Jeep
By Extracting the Radio (Commonly Used Method)
The majority of factory radios, the serial number is printed on a label attached to the top of the unit.
To access it, you'll need to gently pull the radio from the dash using a panel lever.
- Look for a white or yellow sticker marked "Serial" or "S/N"
- The serial is usually 8-14 characters long and preceded by a brand-specific prefix like "T00AM," "TM," "M," "V," or "CL"
- Avoid confusing it with the part number, which is longer and not accepted by the system
If your display shows nothing, this is the fallback method.
Serial number location on Jeep radio label
Radio screen asking for unlock code
On the Display (Without Unit Removal)
Some digital radios allow you to access the S/N via a button combination.
- Try holding preset buttons 1 & 6 while turning on the radio
- The serial number will flash briefly on screen
- The combination of buttons for every radio is unique.
This works only in some cases.
The Difference Between the Serial Number and Part Number
The Serial Number (S/N):
- This is the unique identifier assigned to your specific radio.
- It's required to generate the unlock code.
- Usually found next to a barcode.
The Part Number:
- This refers to the model type of the unit.
- It's used by manufacturers for replacement purposes, but irrelevant for unlocking your stereo.
- May look similar but doesn't link to your specific code.
How to Enter the Radio Code
Once you have the code, entering it is usually simple.
Most radios display "CODE" or "ENTER CODE" on the screen when locked.
Use the radio preset buttons or numbered keys to input each digit.
Some models auto-confirm on final digit - such as pressing "OK," "Enter," or "5" to confirm or holding "Seek", "Tune" or the preset key.
Be careful not to enter the wrong code multiple times.
Lockouts vary by brand, from a few minutes to several hours.
Refer to your manual or contact us if you're unsure about the input method. Our guides cover the steps.
How Our Jeep Radio Code Unlock Works?
Our process is built for speed, simplicity, and accuracy.
From Serial to Code: How It Works
Using our lookup tool is easy.
Just enter your radio's serial, and our system matches it to the exact security PIN for your vehicle.
There's no need for a VIN, and the entire lookup is automated.
Our system includes thousands of supported serials, ensuring high compatibility and accurate delivery.
How Long Will You Have to Wait?
- Usually under 30 seconds on screen
- Also sent via email
- In rare cases, manual lookup is required
- In that case, you may get the code in 1 hour, or 24h at most
Why Thousands Trust Our Unlock Tool
We've helped thousands of users unlock their factory radios with a 4.9 average rating.
No VIN required, no personal data collected - just your radio's serial. Our unlock system is designed for privacy and precision.
If the code doesn't work, don't worry. Just send a short video showing the code entry and serial number, and you'll get back a full refund - no questions asked.
Frequently Asked Questions
What is a Security Code and Why You Need It?
A radio, an anti-theft or a security code is a short numeric password used to unlock your factory car stereo.
It's designed to prevent theft by disabling the radio if disconnected from the battery.
Why You Might Need a Jeep Radio Code?
- Battery was disconnected or replaced
- Radio was removed or swapped
- Fuse was blown and replaced
- The car was jump-started or lost power
- A reset cleared the saved code
- Vehicle was serviced or scanned
- Too many failed code entries triggered a lockout
- A previous owner didn't supply the radio code
- Long periods of disuse can trigger code prompts
Do Jeep cars Require a Radio Code?
Yes, all Jeep vehicles with factory-installed radios (2007-2025) require a radio code after battery disconnection or radio replacement. This applies to all Uconnect-equipped vehicles including Wrangler (JK, JL, JLU), Cherokee, Grand Cherokee, Compass, Patriot, Renegade, and Gladiator.
The anti-theft feature is standard on all Jeep models to protect against theft. Your 4-digit code is permanently linked to your radio's unique serial number.
Where to Find Your Code (If You Already Have It)?
Start by checking the owner's manual. The code is often found on a small card or written directly on a dedicated panel.
You can also look the glovebox or trunk, where dealers or previous owners may have stored a sticker with the code. Some also check behind trim pieces or inside the fuse box.
If you have the original factory-issued code slip, that's the best place to find the code - it usually includes both the serial number and unlock key.
Can You Get Free Jeep Radio Code?
There are a few options - but they don't always work.
- Look inside the glovebox or vehicle documents - some vehicles came with the code printed at delivery.
- Call an authorized service center - some offer free code retrieval if you're the original owner and can provide VIN.
- Try DIY forums or online databases, but these are risky and rarely accurate.
- For most users, our system is the easiest way to retrieve the correct code instantly.
2007-2018 Wrangler JK:
- Serial format: Usually T00AM or TQ1AA
- Code entry: Use preset buttons 1-4
- Common after battery replacement for lift kit installation
2018+ Wrangler JL:
- Serial format: May start with A2C (newer Uconnect)
- Code entry: Touchscreen interface or button combo
- Radio may display serial in Settings menu
Grand Cherokee (2011-2021):
- Very common code request after battery replacement
- Serial formats: T00AM, TM9, A2C
- Uconnect 8.4 systems most affected
Cherokee (2014-2025):
- Newer A2C serial format common
- Touchscreen code entry on most models
Installing a used Jeep radio from a junkyard or salvage yard?
- Radio will still be locked to its original code
- Previous owner's code won't be included
- You MUST use the radio's serial number to get the unlock code
- Our service works perfectly for junkyard/used radios
- No VIN needed - just the serial from the radio itself
Pro Tip: Take a photo of the radio serial number BEFORE removing it from the junkyard vehicle - makes it easier to order the code later!
Jeep