Common Fiat Grande Punto Radio Code Issues
Your radio may lock automatically when it detects a power interruption.
These are the some typical scenarios that trigger the radio code prompt.
Battery Change Lock
When the battery is removed, the Fiat Grande Punto radio locks automatically.
This security feature is designed to protect the original head unit by disabling the radio after power loss.
Other Situations That Trigger a Radio Code on Fiat Grande Punto
- Installing a used head unit will require the original anti-theft code.
- After an ECU or software reset, the radio may lock.
- A blown fuse can cause the Fiat Grande Punto radio to lock.
- Jump-starting the vehicle can reset the radio, requiring the unlock code.
Can I get a Free Fiat Grande Punto Radio Code?
Before you pay for it, it's worth checking a few places where the code is often stored.
Some drivers find their Fiat Grande Punto radio code without needing any tools or paperwork.
Here are the easiest things to check first.
Check the Car Itself
- In the radio manual, often on a sticker page.
- Inside the glovebox, sometimes on a label.
- In the trunk, on a radio label.
- In your service book from the previous owner.
- On the radio unit itself, if it was removed before.
Getting a Fiat Grande Punto Radio Code from the Dealer
Dealerships can retrieve your radio code by checking the vehicle records in their system.
They typically require proof of ownership before sharing the unlock code.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may need extra verification.
- You may need to contact service support during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently bill for the code (It may cost more than 100$).
Searching for the Serial Number on your Grande Punto
To get the correct unlock code, you first need the serial number from the radio.
Depending on your Grande Punto, you can see it on the screen or find it on the radio unit itself.
It's usually written down as S/N, SN, Serial, Serial Num., Serial Number...
These are the easiest ways to locate it:
1. Viewing Grande Punto's S/N on the Display
Unfortunately, on Fiat Grande Punto radios the serial number is not shown on the screen.
In that case, you'll need to remove the radio unit and check the sticker on the side of the radio.
2. Locating your Serial on the Radio Unit
The serial number is usually located on a sticker attached to the radio casing.
Step 1: Turn off the vehicle.
Step 2: After that, remove the dashboard trim.
Step 3: Then release the mounting clips.
Step 4: Carefully slide the unit out partially (Be careful not to damage the cables that the unit is connected to).
Step 5: Look for the serial number on the side of the unit.
Step 6: Write down the full S/N carefully and come back here so that we can generate the code.
Important: Don't mix the Serial Number from the Part Number!
Example: Fiat Grande Punto serial number label location
Typical Fiat Grande Punto Radio Serial Number Formats
Your Fiat Grande Punto radio serial number may start with:
BPCCM
Why Choose Our Fiat Grande Punto Radio Code Generator Service?
Our Fiat Grande Punto radio code lookup is designed to save time.
Unlike traditional dealer lookup, this method requires no paperwork and can be done from home in minutes.
It's a more convenient and cheaper alternative for drivers who need their radio unlocked quickly.
Dealer Option vs FindRadioCode
- Delivery time: May take hours, while FindRadioCode is almost instant 95% of the time.
- Availability: Dealers work Mon - Fri, while our service is 24/7.
- In-person visit: Lookup can require an appointment, while FindRadioCode works online.
- Pricing: It often costs 100 - 200 USD, while our service starts from 9.99 USD.
- Refund policy: Dealers usually offer limited refunds, while we include a full money-back guarantee.
Entering the Radio Code on Fiat Grande Punto
Once you have the Fiat's unlock code, you can enter it using the radio buttons.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the rotary knob to select each digit.
After entering the full code, the radio will confirm the entry.
If you make a mistake multiple times, you may cause the Grande Punto's head unit to block further attempts.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to leave the radio powered for a waiting period or up to an hour before trying again.
Grande Punto's Radio Code FAQs
Not all of them require a radio code, but many factory radios use it as an anti-theft feature.
Newer and older models may still use a code depending on the radio unit.
Free codes are uncommon.
You might already possess the code in the manual or from a previous owner, but most require a serial number lookup.
Yes. Each stereo has its own unique security code. A replacement radio will need its original code to work.