Searching for the Serial Number on your Qubo
To get the correct radio code, you first need the radio serial number.
Depending on your Qubo, you can see it on the screen or find it on the radio unit itself.
It's usually written down as S/N, SN, Serial, Serial Num., Serial Number...
These are the easiest ways to locate it:
1. Viewing Qubo's S/N on the Display
Fiat Qubo radio does not show the serial number on the screen.
Unfortunately, the unit must then be physically removed to find the serial on a factory sticker on the radio casing.
2. How to Find the S/N on the Radio Sticker
To find the serial number, you'll need to take out the radio unit out.
- Start by turning off the vehicle and removing the trim panel.
- Next, unscrew the mounting bolts and pull the unit forward to check the label on the side of the radio. Be careful not to damage the cables.
- Write down full serial number carefully and then come back to our website.
- Know that serial number and part number are not the same. You will find both on the sticker, but you only need for the first one.
Example: Fiat Qubo serial number label location
Common Serial Number Formats on Fiat Qubo Radios
Your Fiat Qubo radio serial number may start with:
BPCCM
Common Fiat Qubo Radio Code Situations
Many drivers encounter radio code issues on their Qubo after electrical work.
Below are the most typical situations when this can happen.
Battery Change Lock
When the battery is disconnected, the Fiat Qubo radio locks automatically.
This factory protection system is designed to prevent theft by disabling the radio after power loss.
Other Situations That Trigger a Radio Code on Fiat Qubo
- Installing a replacement head unit will trigger the original anti-theft code.
- After an ECU or software reset, the radio may enter security mode.
- A blown fuse can cause the Fiat Qubo radio to lock.
- Jump-starting the vehicle can reset the radio, requiring the PIN.
Places to Check Before Buying a Radio Code
Before you pay for it, you should check a few places where the code is often stored.
Some drivers find their Fiat Qubo radio code without needing any tools or paperwork.
Here are the most common things to check first.
Check the Car Itself
- In the vehicle handbook, often on a sticker page.
- Inside the glovebox, sometimes on a label.
- In the spare wheel area, on a radio label.
- In your service book from the previous owner.
- On the head unit itself, if it was removed before.
Can the Dealer Get You the Code?
A Fiat dealer can usually look up the radio code using your Qubo's VIN.
In most cases, you need to contact the service department or visit the dealership and show vehicle documents.
When it is verified, they can request the original anti-theft code for your radio.
Disadvantages:
- You usually need to book an appointment and bring vehicle paperwork.
- Dealers often charge a fee for the lookup service and it can cost more than 100$.
- The process can take hours depending on the model and database.
- Some older Fiat Qubo radios may require manual lookup.
Why Choose Our Fiat Qubo Radio Code Generator Service?
Our Fiat Qubo radio code lookup is designed to avoid dealer visits.
Unlike traditional dealer lookup, this method requires no paperwork and can be done online in minutes.
It's a more convenient and cheaper alternative for drivers who need their radio unlocked quickly.
The Dealer's VIN Lookup vs FindRadioCode
- Delivery time: May take days, while FindRadioCode is instant 95% of the time.
- Availability: Dealers work business hours only, while our service is always available.
- In-person visit: Lookup can require an appointment, while FindRadioCode works online.
- Pricing: It often costs 100 - 200 USD, while our service starts from 9.99 USD.
- Refund policy: Dealers usually offer no guarantee, while we include a full money-back guarantee.
Entering the Radio Code on Fiat Qubo
Once you have the Fiat's security code, you can type it in using the infotainment controls.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the rotary knob to select each digit.
After entering the full code, the radio will restore normal operation.
Try not to make mistakes, because too many wrong attempts can disable your radio temporarily.
It allows a few missed shots before showing a SAFE message.
You can reset the lockout by keeping the ignition on for an hour or a set waiting period.
Radio Code Explained
A radio unlock code, also known as an anti-theft code is a unique numeric unlock key that unlocks your factory radio after it has been locked.
This factory security PIN is triggered when the radio is disconnected from power.
Automakers include this feature to protect factory stereos from theft.
If power is cut, the radio disables itself and requires the unlock CODE before it can be used again.
Once the correct numbers is entered, the stereo is unlocked.
Qubo's Radio Code FAQs
Not all of them require a radio code, but many factory radios use it as an anti-theft feature.
Newer and older models may still use a code depending on the head unit.
Free codes are uncommon.
You might find the code in the paperwork or from a dealer, but most require a paid retrieval.
Yes. Each stereo has its own unlock code. A used radio will need its original code to work.