Chrysler Voyager's Most Common Radio Code Scenarios
Your radio may request a security code when it detects a power interruption.
These are the most common scenarios that activate the radio code prompt.
Lock After a Battery Work
When the battery is disconnected, the Chrysler Voyager radio locks automatically.
This security feature is designed to prevent theft by disabling the radio after electrical reset.
Other Situations That Trigger a Radio Code on Chrysler Voyager
- After a boost start, the radio may reset and request a security code.
- When the radio is removed, it usually requires the original code.
- If a power circuit is interrupted, the radio can lock itself.
- After a software update, electrical repair, or an ECU reset, some Chrysler Voyager radios ask for a code.
Is Getting a Free Chrysler Voyager Radio Code Possible
Before you decide to pay, it's worth checking a few places where the code is often already written down.
Some drivers find their Chrysler Voyager radio code without needing any tools or paperwork.
Here are the most common things to check first.
Check the Car and Its Documentation
- In the user guide, often on a separate code card.
- In the vehicle documentation provided with the car.
- On the back of the radio if the unit was previously removed.
- On a label in the glove compartment.
- Near the trunk lining, where some manufacturers place radio labels.
Getting a Chrysler Voyager Radio Code from the Dealer
Dealerships can retrieve your radio code by checking the VIN in their system.
They typically ask for registration and ID before sharing the security PIN.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may need extra verification.
- You may need to contact service support during business hours.
- The lookup is often not instant and may require waiting.
- Dealers frequently charge a service fee (It may cost more than 100$).
Where to Search for the Serial Number on your Voyager
To get the correct radio code, you first need the serial number from the radio.
Depending on your Voyager, you can see it on the screen or find it on the radio unit itself.
It's usually written down as S/N, SN, Serial, Serial Num., Serial Number...
These are the most common ways to find it:
1. Viewing Voyager's S/N on the Display
Unfortunately, on Chrysler Voyager radios the serial number cannot be viewed on the screen.
In that case, you'll need to take out the head unit and check the label on the back of the radio.
2. Locating your Serial on the Radio Unit
The serial number is usually printed on a sticker attached to the head unit.
Step 1: Turn off the ignition.
Step 2: After that, take off the surrounding panel.
Step 3: Then release the mounting clips.
Step 4: Carefully pull the radio forward partially (Be careful not to damage the cables that the unit is connected to).
Step 5: Look for the serial number on the side of the unit.
Step 6: Write down the full number carefully and come back to our website so that we can generate your code.
Important: Differentiate the Serial Number from the Part Number!
Example: Chrysler Voyager serial number label location
Typical Chrysler Voyager Radio Serial Number Formats
Your Chrysler Voyager radio serial number may start with:
T00AMT00BEU1234L5678
Why Choose Our Chrysler Voyager Radio Code Generator Service?
Our Chrysler Voyager radio code lookup service retrieves the anti-theft code using the stereo serial.
Compared to dealership VIN lookup, this Chrysler Voyager radio code generator is more convenient, doesn't require appointments, and costs less.
It's an easy way to restore access to your factory radio without leaving your home.
Dealer Option vs FindRadioCode
- Delivery time: May take hours, while FindRadioCode is almost instant 95% of the time.
- Availability: Dealers work Mon - Fri, while our service is 24/7.
- In-person visit: Lookup can require an appointment, while FindRadioCode works online.
- Pricing: It often costs 100 - 200 USD, while our service starts from 9.99 USD.
- Refund policy: Dealers usually offer limited refunds, while we include a full refund policy.
Entering the Radio Code on Chrysler Voyager
You need to enter the anti-theft code into the system to unlock your Chrysler's radio.
In the locked unit, the screen usually displays a security message.
You should use control knob, touchscreen, or radio presets to set each digit, then submit the code to reactivate the audio system.
If you make a mistake multiple times, you may cause the Voyager's head unit to enter lockout mode.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to leave the radio powered for a waiting period or up to a full hour before trying again.
Voyager's Radio Code FAQs
Not all of them require a security code, but many factory radios use it as an security measure.
Newer and older models may not require a code depending on the head unit.
Free codes are uncommon.
You might find the code in the paperwork or from a dealer, but most require a serial number lookup.
Yes. Each stereo has its own unlock code. A replacement radio will need its original code to work.