How to Find the S/N on a Crossfire's Radio
To get the correct unlock code, you first need the radio serial number.
Depending on your Crossfire, you can see it on the screen or find it on the radio unit itself.
It's usually written down as S/N, SN, Serial, Serial Num., Serial Number...
These are the most common ways to find it:
1. Viewing Crossfire's S/N on the Display
Unfortunately, on Chrysler Crossfire radios the serial number cannot be viewed on the screen.
In that case, you'll need to take out the head unit and check the label on the side of the radio.
2. Locating your Serial on the Radio Unit
To find the serial number, you'll need to remove the radio unit from the dashboard.
- Start by turning off the vehicle and taking off the dashboard bezel.
- Next, unscrew the mounting bolts and pull the unit forward to check the sticker on the side of the radio. Be careful not to damage the cables that the unit is connected to.
- Write down the serial number carefully and then come back to the website.
- Know that serial number and part number are not equal. You will find both on the sticker, but you only need for the first one.
Example: Chrysler Crossfire serial number label location
Most Common Chrysler Crossfire Radio Serial Number Formats
Your Chrysler Crossfire radio serial number may start with:
T00AMT00BE
Common Chrysler Crossfire Radio Code Problems
Your radio may enter anti-theft mode when it detects a power interruption.
These are the some well-known scenarios that activate the radio code prompt.
Lock After a Battery Change
After a battery change, your radio may show a CODE message.
This happens because the radio loses power, which triggers the anti-theft system.
Other Situations That Trigger a Radio Code on Chrysler Crossfire
- After a boost start, the radio may lose power and request a security code.
- When the radio is replaced, it usually locks automatically.
- If a fuse is pulled, the radio can lock itself.
- After an ECU reset, software update, or electrical repair, some Chrysler Crossfire radios display a CODE message.
Quick Fixes Before Buying a Radio Code
Want free Chrysler Crossfire Radio Code? Actually, you may already have it.
In some cases, the code may already be available in the vehicle itself or in the documentation.
Checking these sources can save you time and money before using an online generator.
Below are the most reliable places to look.
Check the Car and Its Documentation
- In the owner's handbook, often on a separate code card.
- In the vehicle documentation provided with the car.
- On the head unit casing if the unit was previously removed.
- On a sticker in the center console.
- Near the boot panel, where some manufacturers place radio labels.
Getting a Chrysler Crossfire Radio Code from the Dealer
A Chrysler dealer can usually look up the radio code using your Crossfire's vehicle identification number.
In most cases, you need to visit or contact them and show vehicle documents.
Once verified, they can request the original anti-theft code for your radio.
Disadvantages:
- You usually need to book an appointment and bring vehicle paperwork.
- Dealers often charge a fee for the lookup service and it can cost more than 100$.
- The process can take days depending on the model and database.
- Some older Chrysler Crossfire radios may require manual lookup.
Why Choose Our Chrysler Crossfire Radio Code Generator Service?
Our Chrysler Crossfire radio code lookup is designed to simplify the unlock process.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done online in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
The Dealer's VIN Lookup vs FindRadioCode
- Dealer services often charge over $100, while FindRadioCode offers codes from 9.99 USD.
- Some dealers require visiting the service center and showing documents, while FindRadioCode is fully online.
- Dealer lookup can take days, while our system delivers codes instantly 95% of times.
- Dealerships operate during business hours, while FindRadioCode is available anytime.
- Dealer lookups often come with limited refunds, while FindRadioCode offers a full money-back policy.
Entering the Radio Code on Chrysler Crossfire
Once you have the Chrysler's unlock code, you can enter it using the infotainment controls.
Most radios display "ENTER CODE", "----" or "XXXX" message when they are locked.
You typically use the rotary knob to input the code.
After entering the full code, the radio will confirm the entry.
If you fail multiple times, you may cause the Crossfire's head unit to enter lockout mode.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to leave the radio powered for a waiting period or up to a full hour before trying again.
Crossfire's Radio Code FAQs
Many of their radios use a anti-theft code, but not every model year or radio type requires one.
It depends on the factory stereo and production year.
Free security codes are rarely available.
Some manuals may help, but most codes require serial number lookup.
The only free way would be to search your car and its glovebox to see if you already possess the code.
Yes, each head unit has its own unique code. If you install a used radio, you'll need the code for that specific unit.