Searching for the Serial Number on your FE (Truck)
The only thing you'll need to find the corresponding code is your radio's serial number (not part number!).
On all Volvo's, you can find it in one of these places:
- Displayed on the radio screen (by using some combinations of buttons)
- On the radio body itself - you'll need to extract it and write down your serial (which is not as hard as it seems).
Search for something that looks like: Serial Num., SN, S/N, Serial, Serial Number...
1. View the Serial Number on Volvo FE (Truck)'s Screen
Unfortunately, on Volvo FE (Truck) radios the serial number cannot be viewed on the screen.
In that case, you'll need to remove the radio unit and check the sticker on the side of the radio.
2. Find the S/N on the Radio Sticker
To find the serial number, you'll need to remove the radio unit from the dashboard.
- Start by turning off the ignition and removing the trim panel.
- Next, unscrew the mounting bolts and pull the unit forward to check the sticker on the side of the radio. Be careful not to damage the cables that the unit is connected to.
- Write down full serial number carefully and come back to the website.
- Know that serial number and part number are not equal. You will find both of them on the unit, but you only need for the first one.
Example: Volvo FE (Truck) serial number label location
Common Serial Number Formats on Volvo FE (Truck) Radios
Your Volvo FE (Truck) radio serial number may start with:
BPCC
Common Volvo FE (Truck) Radio Code Issues
Many drivers encounter radio lock problems on their FE (Truck) after battery-related issues.
Below are the most frequent situations when this can occur.
Lock After a Battery Work
When the battery is disconnected, the Volvo FE (Truck) radio locks automatically.
This factory protection system is designed to prevent theft by disabling the radio after power loss.
Other Situations That Trigger a Radio Code on Volvo FE (Truck)
- After a jump-start, the radio may reset and request a security code.
- When the head unit is replaced, it usually locks automatically.
- If a power circuit is interrupted, the radio can enter anti-theft mode.
- After a software update, electrical repair, or an ECU reset, some Volvo FE (Truck) radios display a CODE message.
Quick Fixes Before Paying for a Radio Code
Want free Volvo FE (Truck) Radio Code? Actually, you may already have it.
In few cases, your code may already be available in the vehicle or in the documentation.
Checking these sources can save you time and money before using an online generator.
Below are the simplest places to look.
Check the Car Itself
- In the user guide, often on a separate code card.
- In the service booklet provided with the car.
- On the head unit casing if the unit was previously removed.
- On a sticker in the glove compartment.
- Near the spare tire, where some manufacturers place radio labels.
Can the Dealer Get You the Code?
A Volvo dealer can usually retrieve the security code using your FE (Truck)'s VIN.
In most cases, you need to contact the service department or visit the dealership and show vehicle documents.
When it is verified, they can request the original anti-theft code for your radio.
Disadvantages:
- You usually need to book an appointment and bring ID.
- Dealers often ask for payment for the lookup service and it can cost more than 100$.
- The process can take hours depending on the model and database.
- Some older Volvo FE (Truck) radios may not be supported.
Why Use Our Volvo FE (Truck) Radio Code Lookup Service?
Our Volvo FE (Truck) radio code lookup is designed to simplify the unlock process.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done online in minutes.
It's a more convenient and cheaper alternative for drivers who need their radio unlocked quickly.
The Dealer's VIN Lookup vs FindRadioCode
- Dealer services often charge over $100, while FindRadioCode offers codes from 9.99$.
- Some dealers require a visit to the service center, while FindRadioCode is fully remote.
- Dealer lookup can take time, while our system delivers codes right away 95% of times.
- Dealerships operate during business hours, while FindRadioCode is available 24/7.
- Dealer lookups often come with limited refunds, while FindRadioCode offers a full money-back policy.
You've Got the Code. How to Enter It?
Once you have the Volvo's security code, you can enter it using the infotainment controls.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the number keys to select each digit.
After entering the full code, the radio will confirm the entry.
Be careful, because too many wrong attempts can disable your radio temporarily.
It allows a few missed shots before showing a SAFE message.
You can try again by leaving the radio on for one hour or a set waiting period.
Radio Code - Quick Explanation
A factory radio code, also known as an anti-theft code is a unique numeric unlock key that unlocks your factory radio after it has been locked.
This security code is triggered when the radio loses power.
Car manufacturers use this security system to prevent stolen radios from being reused.
If power is cut, the radio stops functioning and asks for the CODE before it can function normally.
Once the correct numbers is entered, the stereo is restored to normal operation.
FE (Truck)'s Radio Code FAQs
Not all of them require a security code, but many factory radios use it as an anti-theft feature.
Newer and older models may still use a code depending on the head unit.
Free codes are uncommon.
You might find the code in the manual or from a previous owner, but most require a paid retrieval.
Yes. Each radio unit has its own unlock code. A used radio will need its original code to work.