What is a Radio Code?
When the radio is disconnected from power, it immediately locks and requires a security code to be entered before it can be used again.
A radio code (also known as an anti-theft code) is a security feature integrated into original car stereos to protect theft.
This system ensures that a stolen radio becomes inoperable without the original code.
Entering the right code returns full stereo and media functionality.
Common Renault Kerax (Truck) Radio Code Situations
Your radio may request a security code when it loses power.
These are the most common scenarios that trigger the radio code prompt.
Lock After a Battery Work
When the battery is replaced, the Renault Kerax (Truck) radio requests a security code.
This security feature is designed to protect the original head unit by disabling the radio after electrical reset.
Other Situations That Trigger a Radio Code on Renault Kerax (Truck)
- After a jump-start, the radio may lose power and request a security code.
- When the head unit is replaced, it usually requires the original code.
- If a fuse is pulled, the radio can enter anti-theft mode.
- After an ECU reset, software update, or electrical repair, some Renault Kerax (Truck) radios ask for a code.
Can I get a Free Renault Kerax (Truck) Radio Code?
Looking for a free Renault Kerax (Truck) Radio Code? Actually, you may find it.
In some cases, your code may already be available in the vehicle or in the documentation.
Checking these sources can save you time and money before using an online lookup tool.
Below are the simplest places to look.
Check the Car and Its Documentation
- In the owner's handbook, often on a separate code card.
- In the vehicle documentation provided with the car.
- On the head unit casing if the unit was previously removed.
- On a sticker in the center console.
- Near the spare tire, where some manufacturers place radio labels.
Getting a Renault Kerax (Truck) Radio Code from the Dealer
Dealerships can generate your radio code by checking the VIN in their system.
They typically require proof of ownership before sharing the security PIN.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may need extra verification.
- You may need to visit the dealer during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently charge a service fee (sometimes more than 100$).
Where to Search for the Serial Number on your Kerax (Truck)
The only thing you'll need to find the corresponding code is your radio's serial num. (not part number!).
On all Renault's, you can find it in one of these places:
- Displayed on the radio screen (sometimes)
- On the radio body itself - you'll need to pull it out and write down your serial (which is not so hard).
Search for something like: Serial, SN, S/N, Serial Num...
1. Find the S/N on Renault Kerax (Truck)'s Display
Unfortunately, on Renault Kerax (Truck) radios the serial number cannot be viewed on the screen.
In that case, you'll need to remove the radio unit and check the label on the side of the radio.
2. Locating your Serial on the Radio Unit
The serial number is usually located on a label attached to the head unit.
Step 1: Turn off the vehicle.
Step 2: After that, remove the dashboard trim.
Step 3: Then release the mounting clips.
Step 4: Carefully pull the radio forward partially (Be careful not to damage the cables that the unit is connected to).
Step 5: Look for the serial number on the rear of the unit.
Step 6: Write down the full number carefully and come back to our website so that we can generate the code.
Important: Don't mix the Serial Number from the Part Number!
Example: Renault Kerax (Truck) serial number label location
Most Common Renault Kerax (Truck) Radio Serial Number Formats
Your Renault Kerax (Truck) radio serial number may start with:
BPCCPHPR
You've Got the Code. How to Enter It?
Once you have the Renault's security code, you can enter it using the radio buttons.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the rotary knob to select each digit.
After entering the full code, the radio will unlock automatically.
If you fail multiple times, you may cause the Kerax (Truck)'s head unit to enter lockout mode.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to leave the radio powered for a waiting period or up to an hour before trying again.
Why Use Our Renault Kerax (Truck) Radio Code Lookup Service?
Our Renault Kerax (Truck) radio code lookup is designed to save time.
Unlike traditional dealer lookup, this method requires no paperwork and can be done from home in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
Dealer Option vs FindRadioCode
- Delivery time: May take days, while FindRadioCode is almost instant 95% of the time.
- Availability: Dealers work business hours only, while our service is always available.
- In-person visit: Lookup can require a visit, while FindRadioCode works remotely.
- Pricing: It often costs over $100, while our service starts from 9.99 USD.
- Refund policy: Dealers usually offer limited refunds, while we include a full refund policy.
Kerax (Truck)'s Radio Code FAQs
Not all of them require a radio code, but many factory radios use it as an anti-theft feature.
Newer and older models may still use a code depending on the head unit.
Free codes are uncommon.
You might already possess the code in the paperwork or from a dealer, but most require a serial number lookup.
Yes. Each stereo has its own unique security code. A used radio will need its original code to work.