Finding the Serial N. on a 1500's Radio
To get the correct unlock code, you first need the serial number from the radio.
Depending on your 1500, you can see it on the screen or find it on the radio unit itself.
Common abbreviations are S/N, SN, Serial, Serial Num., Serial Number...
These are the most common ways to locate it:
1. Viewing 1500's S/N on the Display
Unfortunately, on Ram 1500 radios the serial number cannot be viewed on the screen.
In that case, you'll need to take out the head unit and check the sticker on the side of the radio.
2. Find the S/N on the Radio Sticker
The serial number is usually located on a sticker attached to the radio casing.
Step 1: Turn off the car.
Step 2: After that, remove the dashboard trim.
Step 3: Then release the mounting clips.
Step 4: Carefully slide the unit out partially (Be careful not to damage the cables).
Step 5: Look for the serial number on the side of the unit.
Step 6: Write down the full number carefully and come back here so that we can generate the code.
Important: Don't mix the Serial Number from the Part Number!
Example: Ram 1500 serial number label location
Common Serial Number Formats on Ram 1500 Radios
Your Ram 1500 radio serial number may start with:
T00AMT00BEU1234L5678
Common Ram 1500 Radio Code Problems
Many owners encounter radio lock problems on their 1500 after electrical work.
Below are the most typical situations when this can occur.
Battery Change (Most Common)
After a battery change, your radio may show a CODE message.
This happens because the radio loses power, which activates the anti-theft system.
Other Scenarios
- Installing a replacement head unit will trigger the original anti-theft code.
- After an ECU or software reset, the radio may enter security mode.
- A fuse removal can cause the Ram 1500 radio to request a security code.
- Jump-starting the vehicle can reset the radio, requiring the PIN.
Is Getting a Free Ram 1500 Radio Code Possible
Before you pay for it, you should check a few places where the code is often already written down.
Some owners find their Ram 1500 radio code without needing any tools or paperwork.
Here are the easiest things to check first.
Look for it in the Car Itself
- In the owner's manual, often on a sticker page.
- Inside the center console, sometimes on a label.
- In the boot compartment, on a radio label.
- In your car paperwork from the previous owner.
- On the head unit itself, if it was serviced earlier.
Can the Dealer Get You the Code?
Dealerships can retrieve your radio code by checking the vehicle records in their system.
They typically ask for registration and ID before sharing the unlock code.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may not be in their database.
- You may need to visit the dealer during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently charge a service fee (sometimes more than 100$).
Why Choose Our Ram 1500 Radio Code Generator Service?
Our Ram 1500 radio code lookup is designed to avoid dealer visits.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done online in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
Dealer Option vs FindRadioCode
- Dealer services often charge high fees, while FindRadioCode offers codes from 9.99 USD.
- Some dealers require a visit to the service center, while FindRadioCode is fully remote.
- Dealer lookup can take days, while our system delivers codes instantly 95% of times.
- Dealerships operate during weekdays, while FindRadioCode is available 24/7.
- Dealer lookups often come with limited refunds, while FindRadioCode offers a full money-back policy.
How to Enter the Radio Code on Ram 1500
Once you have the Ram's unlock code, you can type it in using the infotainment controls.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the rotary knob to input the code.
After entering the full code, the radio will confirm the entry.
Be careful, because too many wrong attempts can disable your radio temporarily.
It will allow you a few incorrect tries before showing a SAFE message.
You can try again by keeping the ignition on for 60 minutes or a set waiting period.
1500's Radio Code FAQs
Many of their radios use a anti-theft code, but not every model year or radio type requires one.
It depends on the factory stereo and production year.
Free security codes are rarely available.
Some online tools may help, but most codes require dealer lookup.
The only free way would be to check your vehicle and its glovebox to see if you already possess the code.
Yes, each radio unit has its own security code. If you install a used radio, you'll need the code for that specific unit.