Searching for the Serial Number on your Qashqai
To get the correct radio code, you first need the serial number from the radio.
Depending on your Qashqai, you can see it on the screen or find it on the radio unit itself.
Common abbreviations are S/N, SN, Serial, Serial Num., Serial Number...
These are the most common ways to locate it:
1. Viewing Qashqai's S/N on the Display
Unfortunately, on Nissan Qashqai radios the serial number cannot be viewed on the screen.
In that case, you'll need to remove the radio unit and check the label on the back of the radio.
2. Find the Serial Number on the Radio Sticker
The serial number is usually located on a sticker attached to the head unit.
Step 1: Turn off the ignition.
Step 2: After that, remove the dashboard trim.
Step 3: Then release the mounting clips.
Step 4: Carefully slide the unit out partially (Be careful not to damage the cables that the unit is connected to).
Step 5: Look for the serial number on the rear of the unit.
Step 6: Write down the full number carefully and come back to our website so that we can generate your code.
Important: Differentiate the Serial Number from the Part Number!
Example: Nissan Qashqai serial number label location
Common Serial Number Prefixes on Nissan Qashqai Radios
Your Nissan Qashqai radio serial number may start with:
BPCNLCN
Common Nissan Qashqai Radio Code Issues
Many owners encounter security code prompts on their Qashqai after electrical work.
Below are the most common situations when this can happen.
Battery Change Problem
After a battery replacement, your radio may lock.
This happens because the radio loses power, which triggers the security lock.
Other Situations That Trigger a Radio Code on Nissan Qashqai
- Installing a used head unit will require the original radio code.
- After an ECU or software reset, the radio may lock.
- A fuse removal can cause the Nissan Qashqai radio to lock.
- Jump-starting the vehicle can reset the radio, requiring the unlock code.
Places to Check Before Paying for a Radio Code
Before you decide to pay, you should check a few places where the code is often stored.
Some owners find their Nissan Qashqai radio code without needing any tools or paperwork.
Here are the most common things to check first.
Check the Car and Its Documentation
- In the owner's manual, often on a code card.
- Inside the glovebox, sometimes on a small card.
- In the boot compartment, on a service sticker.
- In your car paperwork from the previous owner.
- On the radio unit itself, if it was removed before.
Can the Dealer Get It for You?
Dealerships can retrieve your radio code by checking the VIN in their system.
They typically ask for registration and ID before sharing the security PIN.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may not be in their database.
- You may need to contact service support during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently bill for the code (sometimes more than 100$).
Why Choose Our Nissan Qashqai Radio Code Generator Service?
Our Nissan Qashqai radio code lookup is designed to save time.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done from home in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
Traditional Option (The Dealer) vs FindRadioCode
- Dealer services often charge over $100, while FindRadioCode offers codes from 9.99$.
- Some dealers require visiting the service center and showing documents, while FindRadioCode is fully online.
- Dealer lookup can take days, while our system delivers codes instantly 95% of times.
- Dealerships operate during weekdays, while FindRadioCode is available anytime.
- Dealer lookups often come with no guarantee, while FindRadioCode offers a full money-back policy.
Entering the Radio Code on Nissan Qashqai
Once you have the Nissan's security code, you can type it in using the infotainment controls.
Most radios display a "CODE", "ENTER CODE", or "----" message when they are locked.
You typically use the number keys to select each digit.
After entering the full code, the radio will restore normal operation.
Try not to make mistakes, because too many wrong attempts can disable your radio temporarily.
It will allow you a few incorrect tries before showing a LOCKED message.
You can try again by leaving the radio on for one hour or a set waiting period.
Radio Code Explained
When the radio is disconnected from power, it immediately locks and requires an unlock code to be entered before it can be used again.
A radio code (also known as an anti-theft code) is a built-in security system integrated into factory car stereos to protect theft.
This system ensures that a stolen radio becomes inoperable without the correct code.
Entering the right code returns full audio and media functionality.
Frequent Questions about Nissan Qashqai Radio Code
Not all of them require a security code, but many factory radios use it as an security measure.
Newer and older models may not require a code depending on the radio unit.
Free codes are uncommon.
You might already possess the code in the manual or from a previous owner, but most require a serial number lookup.
Yes. Each radio unit has its own unlock code. A used radio will need its original code to work.