Common Fiat Punto Radio Code Problems
Your radio may enter anti-theft mode when it loses power.
These are the some typical scenarios that activate the radio code prompt.
Battery Change (Most Common)
After a battery replacement, your radio may show a CODE message.
This happens because the radio recognizes a voltage interruption, which activates the anti-theft system.
Other Situations That Trigger a Radio Code on Fiat Punto
- Installing a used head unit will require the original radio code.
- After an ECU or software reset, the radio may enter security mode.
- A blown fuse can cause the Fiat Punto radio to lock.
- Jump-starting the vehicle can trigger anti-theft mode, requiring the PIN.
Is Getting a Free Fiat Punto Radio Code Possible
Looking for a free Fiat Punto Radio Code? Actually, you may already have it.
In few cases, the code may already be available in the vehicle itself or in the documentation.
Checking these sources can save you time and money before using an online lookup tool.
Below are the most reliable places to look.
Check the Car Itself
- In the radio manual, often on a code card.
- Inside the glovebox, sometimes on a label.
- In the boot compartment, on a service sticker.
- In your service book from the previous owner.
- On the head unit itself, if it was serviced earlier.
Getting a Fiat Punto Radio Code from the Dealer
A Fiat dealer can usually look up the security code using your Punto's vehicle identification number.
In most cases, you need to visit or contact them and prove ownership.
Once verified, they can request the original anti-theft code for your radio.
Disadvantages:
- You usually need to book an appointment and bring vehicle paperwork.
- Dealers often ask for payment for the lookup service and it can cost more than 100$.
- The process can take days depending on the model and database.
- Some older Fiat Punto radios may not be supported.
Searching for the Serial Number on your Punto
The only thing you'll need to get the code is your radio's serial num. (not part number!).
On all Fiat's, you can find it in one of these places:
- Directly on the radio screen (by using some combinations of buttons)
- On the radio body itself - you'll need to extract it and write down your serial (which is not as hard as it seems).
Search for something that looks like: Serial, SN, S/N, Serial Num...
1. Find the S/N on Fiat Punto's Screen
Unfortunately, on Fiat Punto radios the serial number is not shown on the screen.
In that case, you'll need to take out the head unit and check the sticker on the side of the radio.
2. Locating the Serial on the Radio Unit
To find the serial number, you'll need to remove the head unit out.
- Start by turning off the vehicle and taking off the dashboard bezel.
- Next, unscrew the mounting bolts and slide the radio out to check the label on the back of the radio. Be careful not to damage the cables that the unit is connected to.
- Write down the serial number carefully and then come back to our website.
- Know that serial number and part number are not the same. You will find both of them on the unit, but you only care for the first one.
Example: Fiat Punto serial number label location
Typical Fiat Punto Radio Serial Number Formats
Your Fiat Punto radio serial number may start with:
BPCCM
You've Got the Code. How to Enter It?
Once you have the Fiat's security code, you can type it in using the radio buttons.
Most radios display "ENTER CODE", "----" or "XXXX" message when they are locked.
You typically use the rotary knob to input the code.
After entering the full code, the radio will unlock automatically.
If you fail multiple times, you may cause the Punto's head unit to block further attempts.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to keep the ignition on for a waiting period or up to a full hour before trying again.
Why Use Our Fiat Punto Radio Code Lookup Service?
Our Fiat Punto radio code lookup is designed to save time.
Unlike traditional dealer lookup, this method doesn't require VIN and can be done online in minutes.
It's a faster and cheaper alternative for drivers who need their radio unlocked quickly.
The Dealer's VIN Lookup vs FindRadioCode
- Dealer services often charge high fees, while FindRadioCode offers codes from 9.99$.
- Some dealers require a visit to the service center, while FindRadioCode is fully online.
- Dealer lookup can take days, while our system delivers codes right away 95% of times.
- Dealerships operate during weekdays, while FindRadioCode is available 24/7.
- Dealer lookups often come with limited refunds, while FindRadioCode offers a full money-back policy.
Punto's Radio Code FAQs
Not all of them require a security code, but many factory radios use it as an anti-theft feature.
Newer and older models may still use a code depending on the radio unit.
Free codes are uncommon.
You might already possess the code in the paperwork or from a dealer, but most require a serial number lookup.
Yes. Each radio unit has its own unique security code. A replacement radio will need its original code to work.