Searching for the Serial Number on your Avenger
The only thing you'll need to get the code is your radio's serial number (not part number!).
On all Dodge's, you can find it in one of these places:
- Displayed on the radio screen (by using some combinations of buttons)
- On the radio unit itself - you'll need to extract it and write down serial (which is not so hard).
Search for something like: Serial, SN, S/N, Serial Num...
1. View the Serial Number on Dodge Avenger's Display
Dodge Avenger radio does not show the serial number on the screen.
Unfortunately, the unit must then be physically removed to find the serial on a factory sticker on the radio casing.
2. Locating your Serial on the Radio Unit
The serial number is usually located on a label attached to the head unit.
Step 1: Turn off the ignition.
Step 2: After that, take off the surrounding panel.
Step 3: Then release the mounting clips.
Step 4: Carefully slide the unit out partially (Be careful not to damage the cables).
Step 5: Look for the serial number on the rear of the unit.
Step 6: Write down the full Serial Number carefully and come back to our website so that we can generate your code.
Important: Don't mix the Serial Number from the Part Number!
Example: Dodge Avenger serial number label location
Most Common Dodge Avenger Radio Serial Number Formats
Your Dodge Avenger radio serial number may start with:
T00AMT00BEU1234L5678
Dodge Avenger's Most Common Radio Code Scenarios
Your radio may enter anti-theft mode when it loses power.
These are the some typical scenarios that activate the radio code prompt.
Lock After a Battery Change
When the battery is removed, the Dodge Avenger radio locks automatically.
This factory protection system is designed to protect the original head unit by disabling the radio after electrical reset.
Other Situations That Trigger a Radio Code on Dodge Avenger
- After a jump-start, the radio may reset and request a radio code.
- When the head unit is removed, it usually requires the original code.
- If a fuse is pulled, the radio can enter anti-theft mode.
- After an ECU reset, software update, or electrical repair, some Dodge Avenger radios display a CODE message.
Quick Fixes Before Paying for a Radio Code
Before you pay for it, it's worth checking a few places where the code is often stored.
Some drivers find their Dodge Avenger radio code without needing any tools or paperwork.
Here are the easiest things to check first.
Check the Car Itself
- In the owner's handbook, often on a separate code card.
- In the maintenance records provided with the car.
- On the head unit casing if the unit was previously removed.
- On a label in the glove compartment.
- Near the spare tire, where some manufacturers place radio labels.
Getting a Dodge Avenger Radio Code from the Dealer
Dealerships can retrieve your radio code by checking the VIN in their system.
They typically require proof of ownership before sharing the security PIN.
This is the official way to restore access to the factory radio.
Downsides:
- Some imported or older radios may not be in their database.
- You may need to visit the dealer during business hours.
- The lookup is often slower and may require waiting.
- Dealers frequently charge a service fee (sometimes more than 100$).
Why Use Our Dodge Avenger Radio Code Lookup Service?
Our Dodge Avenger radio code lookup service retrieves the anti-theft code using the stereo serial.
Compared to dealership VIN lookup, this Dodge Avenger radio code generator is more convenient, doesn't require appointments, and costs less.
It's an easy way to restore access to your factory radio without leaving your home.
Dealer Option vs FindRadioCode
- Dealer services often charge over $100, while FindRadioCode offers codes from 9.99$.
- Some dealers require a visit to the service center, while FindRadioCode is fully online.
- Dealer lookup can take time, while our system delivers codes right away 95% of times.
- Dealerships operate during weekdays, while FindRadioCode is available anytime.
- Dealer lookups often come with limited refunds, while FindRadioCode offers a 100% refund.
Now You Have the Code. How to Enter It?
You need to type in the code into the system to unlock your Dodge's radio.
When the unit is locked, the screen usually shows a code prompt.
You should use radio presets, control knob, or touchscreen to set each digit, then confirm the code to reactivate the audio system.
If you fail multiple times, you may cause the Avenger's head unit to enter lockout mode.
When this happens, the screen can display messages like "CODE ERR", "ERROR", or a blank screen.
To unlock the system, you usually need to keep the ignition on for a waiting period or up to a full hour before trying again.
Frequently Asked Questions about Dodge Avenger Radio Code
Not all of them require a radio code, but many factory radios use it as an security measure.
Newer and older models may not require a code depending on the head unit.
Free codes are uncommon.
You might already possess the code in the manual or from a previous owner, but most require a paid retrieval.
Yes. Each radio unit has its own unique security code. A used radio will need its original code to work.